We commissioned this site on 09/09/24 on behalf of Marsh Ind, they have since had a new control panel, they have mounted it and wired it in. They want someone to go and program the control panel and set over loads etc.

Quote 2 x 3/4 x 500 diffusers 10 x stainless steel Tex screws 10 SS washers 1 man 1.30

WPL Sewage treatment system installed in 1991. The system is currently not working, media is no longer in the correct cage, this needs to be investigated to find the cause. Tank requires a full empty to assess the tank, pipework etc to see what requires repair/replacement. All items in the kiosk require removing and new sockets/panels need assessing for replacement. There is a sludge return pump within the tank which is not working, this requires assessing to either replace or change to an air blower based sludge return. There appears to be a sand filter in one part of the tank with air blowing into it. This needs to be looked at and decided what is the best option to deal with this. The first step is to remove all items from the kiosk to create room and check airlines to the plant. To get the tank emptied to check the tank condition, measure the pipes and see why the media has escaped. Following this visit we would be able to provide a quotation for the full works required. The tanker is booked for the 13th March by yourselves to empty the tank, we suggest we attend site at the same time to complete the above first step. We would guess a rough budget for the works would be in the range of 4000 - 6000 + VAT based on the tank being structurally sound and no extensive damage is found when the tanker empties the system. This is a guess budget priced and is based on Marks opinion only and is not fact.

SSC March 2025 Service - Also need to check if access is dry for tanker & jetter

Twin Flygt control panel from Electronet 1No Engineer 4 hrs Tanker and jetter

Meeting Eurotech on site at 8am Just to confirm the objectives for the system check: 1. Check if the current system meets current general binding rules 2. Check the size of the current system to ensure it is adequate for the property 3. Check if there is any surface water from the downpipes entering the system 4. Check the condition of the tank for crack/leaks/structural condition 5. If possible to check the outlet point, if this is to ground, we will check for any signs of leeching (indicates drainfield failure) 6. Provide a full report with photographs and any quotes should remedial works or replacement be required Call Kirsty whilst on site for de-brief to ensure she has all info to produce report

marsh commission. No RAMS or induction required.

March 2025 Service

March 2025 Service

March 2025 Service

March 2025 Service

March 2025 Service

March 2025 Service

Hotel for overnights

BOOKED FOR 8AM NS - Service just servicing this one pump station up to 1 hour on site Please look at the gate valve - Customer has advised it is corroded and needs replacement

Booked for 1-3 - Call 07791 046924 on route Quote 07035 1 x SULZER ABS MF 565 Pump 1 x Engineer @ 1.5 hrs to fit.

GSSC March 2025 - Gone ahead let site know a date to possibly help with lids otherwise 2 man. Must be done March or first 2 weeks in April - CK emailed

NS - Service / Call Out - Unit had high level alarm on - Nimesh talked her through switching alarm off over the weekend - If parts are required check with office before fitting

North plant - 1No New 250L/min compressor 1No New 500L/min compressor Up to 5m of new ducting 1No Waste water Engineer on site for up to 3 hours

NS Service March 2025 - customer has requested Shaun - CK emailed brian

SSC March 2025 Service - booked for after 3pm, please do not knock on the door before 3

1No New Semison pump 1No Waste water Engineer on site for up to 1 hour

NS Service Marsh 2025

Please call David 01773 743453 30 mins before arrival NS - March 2025 passing visit to see if Septic Tank requires an empty - customer requested arrival around 11am

Service - Direct with school They thought they might have had a problem with the station but no warning lights on the panel